TREMEC TKX, TREMEC Magnum and SST A41 Conversion Kits for 1971-1974 MOPAR B-Body: Charger, GTX, Road Runner, Satellite and Super Bee
Enjoy Life in Overdrive
Silver Sport Transmissions has the best-engineered kits to modernize the powertrain of your 1971-1974 MOPAR B-body. Our PerfectFit™ Kits bring the shifter handle to the factory-correct position for the best possible fit and our billet shifter tower provides short, crisp shifts.
Car shows, close friends, and good times are all within easy reach when you choose a TREMEC TKX 5-speed, T56 Magnum 6-speed, or Silver Sport Transmissions A41 4-speed automatic overdrive from SST!
The TREMEC TKX 5-Speed is the newest and most compact transmission from TREMEC. Capable of handling up to 600 lb-ft torque and 7,500 rpm shifts, the TKX is strong enough to handle most street applications. Our TKXs have been modified to give you a factory-correct shifter position so your car will retain the factory look. They also come with a crossmember to keep your driveline angles in spec. Find out why people call this powertrain upgrade the best improvement they've made to their car!
The TREMEC Magnum 6-speed is quickly gaining in popularity as more and more people opt for larger engines. The 6-speed has two overdriven gears and can handle up to 700 lb-ft torque and 7,800 rpm shifts. Although it's certainly capable of handling the abuse of the track, it's also great for everyday use. Our short throw shifter tower turns a great transmission into one of the best out there and our PerfectFit™ kit will let you keep a factory look with modern performance.
Silver Sport Transmissions A41 4-Speed Automatic is based on the GM 4L60E transmission and comes in three performance stages. It can handle anywhere from 450 to 650 lb-ft torque. It's an excellent alternative to replace the original automatic and with the overdrive, it is an impressive upgrade. Switch from a gas-saving economy mode to performance mode with a flip of a switch or go from performance to high performance, you set the custom shift points!
Use the tabs above to learn more about each transmission or use the Speed Analyzer to determine which transmission will fit your car and driving style the best.
Request a Quick Quote
Tremec TKX PerfectFit™ for Late Mopar B Body
When you convert to the Tremec TKX 5 Speed, you will experience:
- Compact, rounded case - No cutting
- Capable of handling 600 lb•ft torque
- Capable of 7,500 rpm shifts
- 30-50% increase in fuel economy
- Low RPM cruising
- Reduced NVH (noise - vibration - harshness)
- Interchangeable with mechanical or hydraulic clutch actuators by removing just a few bolts, no need to tear down the transmission
- Designed for everyday street use - an ideal blend of brute strength and street manners
TKX Gear Ratios
Wide Ratio - 3.27, 1.98, 1.34, 1.00, 0.72
Close Ratio - 2.87, 1.89, 1.28, 1.00, 0.68 OR 0.81
Silver Sport Transmissions Overdrive Kit Overview
Driveshafts are no longer included on your order, but may be purchased seperately.

- TREMEC TKX 5 Speed Overdrive
- STX Shifters® - True offset for a factory-correct shifter position
- Pilot Bearing - Super heavy-duty needle roller type with lube seal for long life
- Installation Hardware - Every bolt you need is included and clearly labeled
- Isolator Mount - Rubber for vibration isolation or optional heavy-duty poly for track duty
- Reverse Lights Connector - Waterproof connector
- Speedometer Connection - Mechanical and electronic compatible
- Crossmember
- Clutch Alignment Tool
- Detailed Installation Instructions - Including free lifetime tech support
- Market Leading Warranty - learn more
Request a Quick Quote
Auto to Manual Conversions and Optional Parts
- Driveshaft & Slip Yoke - Lightweight, steel, custom driveshaft for superior strength. Dynamically balanced for smooth operation and premium solid u-joints come standard.
- SST Advanced Friction™ Flywheel* - Billet steel, not cast steel, for improved durability and safety
- SST Advanced Friction™ Series II Clutch* - High performance, long life packages with easy pedal effort tailored to your needs
- Bellhousing* - Choose from titanium-aluminum OEM type or steel scatter shields that meet race safety requirements.
- Hydraulic Clutch Actuator Kit* - Modern technology with less pedal effort
- Master cylinder - high-quality
- Heavy-Duty concentric slave cylinder - 1,000,000 cycle service life
- Pre-engineered firewall mount for master cylinder - eliminates guess-work for easy installation
- Remote reservoir with hose
- Braided steel pressure hose
- Pedal pushrod and all hardware
- Detailed installation instructions
- Shifter Boot and Trim Ring*
- Shifter Handle* - Pistol grip handle with 5-speed shift pattern inlay
- Tunnel Hump* - Replica manual transmission tunnel hump
- Pedals* - Replica clutch and brake pedals, includes new pedal pads
- Fluid - Break-In Fluid, transmission fluid, and hydraulic clutch fluid available for purchase
*Required for Automatic to Manual Conversions
Request a Quick Quote
Why buy from Silver Sport Transmissions?
- Fast Shipping
- Popular kits are in stock for short lead times
- Complete Kits
- Why go to multiple sources for parts? Make one phone call and get things going on your project now.
- Excellent Customer Service
- Lifetime tech support
- Knowledgeable staff
- Premium Components
- Only approved, high-quality parts are sold by SST.
- Engineering Know-How
- Only SST has experienced and licensed engineers on staff. We know what fits, what works and how to install it.
Call today and let us assemble a custom kit just for you, or complete a Quick Quote
T56 Magnum 6-Speed PerfectFit™ Kit for B-Body
Highway Cruising Double Overdrive!
Press: Hotrod Magazine
When you convert to the Tremec T56 Magnum 6 Speed, you will experience:
- 30-50% increase in fuel economy
- Low RPM cruising for greatly reduced driver fatigue and an improved highway driving experience. Road trips are fun again
- Reduced engine wear leading to longer engine life
- Cooler engine operating temperatures
- Reduced NVH (noise - vibration - harshness)
Tremec T56 Magnum Gear Ratios
2.66, 1.78, 1.30, 1.00, 0.80, 0.63
2.97, 2.10, 1.46, 1.00, 0.80, 0.63
Silver Sport Transmissions PerfectFit Kit Overview
Keep your torsion bar suspension! Our kit does not require changing to coil over.
Driveshafts are no longer included on your order, but may be purchased seperately.
Tremec T56 Magnum Kit Components
- Tremec T56 Magnum 6 Speed Double Overdrive
- PerfectFit Shifter position fits inside the factory console
- 700 torque capacity wide or close ratio.
- Friction Lined Synchronizer Blocker Rings come standard for easy high RPM shifts
- Market Leading Warranty - learn more
- Optional Add the Front Shift Kit for bench seat clearance
- SFI Rated Steel Bellhousing
- Hydraulic Clutch Actuator Kit
- 6-Speed Pattern Shift Handle Insert
- Sheetmetal to widen the tunnel
- Speedometer Connection
- Mechanical and electronic compatible
- Speedo Gear
- Reverse Light Connector
- Pilot Bearing
- Super heavy-duty needle roller type with lube seal for long life
- Crossmember - No need to replace torsion bar suspension. Stronger than the original equipment crossmember.
- Isolator Mount
- Rubber for vibration isolation
- Installation Hardware
- Detailed Installation Instructions - including free lifetime tech support
- Market Leading Warranty - learn more
Optional components offered
- Slip Yoke and Driveshaft
- Flywheel Billet steel, not cast steel, for improved durability and safety.
- Clutch Kit
- High performance, long life packages with easy pedal effort tailored to your needs
- Reproduction Shifter Handle (Wooden Look or Carbon Fiber)
- Cryogenic Gear Treatment
- Driveshaft Upgrades
Why buy from Silver Sport Transmissions?
- Fast Shipping
- Popular kits are in stock for short lead times
- Complete Kits
- Why go to multiple sources for parts? Make one phone call and get things going on your project now.
- Excellent Customer Service
- Lifetime tech support
- Knowledgeable staff
- Premium Components
- Only approved, high-quality parts are sold by SST.
- Engineering Know-How
- Only SST has experienced and licensed engineers on staff. We know what fits, what works, and how to install it.
Call today and let us assemble a custom kit just for you.
A41 Automatic PerfectFit™ Kit for B-Body Mopar
The A41 4 Speed Automatic Transmission
67-76 Model Years Only
A41 Ratio: 3.06, 1.63, 1.00, 0.70
Available in three stages:
Stage 1 - 450 Torque
Stage 2 - 550 Torque
Stage 3 - 650 Torque
Features:
- Low RPM Cruising
- Great Shift Quality
- Dyno Tested
- Stand Alone Electronic Controller
- Lockup Torque Converter with Optional Stall Speeds
- No Tunnel Cutting
The A41 is an excellent way to replace your tired 904, 727, 518, Powerglide, TH350 (Turbo 350), TH400 (Turbo 400), 200R4 (200-4R) or 700R4 with modern technology that offers better acceleration and a 30% reduction in cruising rpms
Request a Quick Quote
COMPUSHIFT Sport
The COMPUSHIFT Sport is the next generation of transmission controllers.
- All the connectors - The COMPUSHIFT Sport transmission controller looms come with a full set of Plug and Play OEM Connectors for all supported transmissions - making installation effortless.
- Smart Phone Integration - COMPUSHIFT Sport brings you the first-ever smartphone integrated transmission controller. This makes programming dead easy – allowing programming via Android or iOS smartphones, tablets, PCs and Macs. Connectivity includes both Bluetooth and dual independent CAN bus networks. All software is included.
- Fully Customize Your Transmission - Get full and precise control of the shifting strategy for your transmission. COMPUSHIFT Sport and Pro are delivered with versatile factory-set programming for a wide variety of transmission and engine combinations. However, you can completely customize settings to your exact specifications.
COMPUSHIFT Sport Technical Specifications
Smart Phone / Tablet / Computer Integration:
- COMPUSHIFT Sport brings you the first-ever smartphone integrated transmission controller. This makes programming dead easy – allowing programming via Android or iOS smartphones, tablets, PCs and Macs. Connectivity includes both Bluetooth and dual independent CAN bus networks. All software is included.
Control:
- Get full and precise control of the shifting strategy for your transmission. COMPUSHIFT Sport and Pro are delivered with versatile factory-set programming for a wide variety of transmission and engine combinations. However, you can completely customize settings to your exact specifications.
- Fully adjustable shift speeds, shift feel, and torque converter clutch control.
- Provides adjustable output for speedometer calibration.
Compatibility:
- COMPUSHIFT has the capability of communicating with many different factory and aftermarket engine controllers for quick plug and play setup. No wire splicing required.
- Uses industry-standard trouble codes
Ease of Setup:
- All The Connectors - The COMPUSHIFT Sport transmission controller looms come with a full set of Plug and Play OEM Connectors for all supported transmissions - making installation effortless.
- COMPUSHIFT software is upgradeable in the field via Bluetooth. Updates are available via Google Play, Kindle, and the Apple App Store.
- Two full sets of calibration modes that can be selected by button or app.
- Transfer case switch input for shift/speedometer calibration in low range / 4WD vehicles.
Durability:
- Highly Water and Dust Proof - IP65 Rated
Request a Quick Quote
Each PerfectFit™ Kit comes with the correct components for your application and will include the following parts:
Driveshafts are no longer included on your order, but may be purchased seperately.
- Automatic Transmission - A41 (GM 4L60E / GM 4L65E Aftermarket replacement)
- COMPUSHIFT Sport Controller
- Dipstick and Tube - OEM Style
- Auxiliary Oil Cooler - High performance for Stage 2 and 3 only, Optional purchase for Stage 1 kits
- Bellhousing
- Lock Up Torque Converter - Electronically controlled, stall options available
- Throttle Position Sensor - Bolt-on unit provides throttle feedback to the computer with just 3 wires
- Pre-Bent Steel Cooler Lines - Replaces factory lines (64-66 Rubber Cooler Lines)
- Flex Plate - SFI Approved
- Crossmember* - Heavy-duty formed steel, powder-coated
- Rubber Isolator* - Heavy-duty isolator to minimize vibration
- Speedometer Cable - Mechanical Speedo Cable
- Hardware - High strength grade 8 fasteners standard
- Wiring - Plug & Play wiring harness
- Inspection Cover
- Reverse Light Wiring
Optional:
- Driveshaft* - High strength computer balanced with sealed u-joints & slip yoke (64-66 Slip Yoke Only)
Request a Quick Quote